“Standard WS2811” protocol, adopted also by Fun-Led, based on a serial signal (SPI) which allows to manage the brightness and the colour of each single lamp. The lamps are not numbered and their cascaded connection must follow a precise path based on an initial project. The versions with 20 LEDs (size M), 30 LEDs (size L) and 60 LEDs (size XL) are divided into internal sections called chipset (each made up of 10 LEDs) in order to reproduce special light effects inside the lamp itself.

This operative mode requires a power supply with direct current and a controller board.

Fun-Led offers numerous hardware and software solutions to manage and control its own lamps at best.

All the Pixel lamps can be supplied with RGB and Mono-Colour LEDs and equipped with the Enhanced and the Super Strobe options.

The brand-new SMART technology is a Fun-Led absolute and exclusive innovation, which enables to control the single LEDs of the lamp, in order to create light games inside the lamp itself for unique and amazing effects. This is possible thanks to the use of a Fun-Led own communication protocol. This technology is available for the versions with 20 LEDs (size M), 30 LEDs (size L) and 60 LEDs (size XL). The Smart lamps can work only combined with Fun-Led controller and software.

All the SMART lamps are available only with RGB LEDs, they are integrated with the Enhanced features and can be equipped with the Super Strobe option.

Enhanced is a set of functions which is applied to the Controllable Pixel lamps from diameter 45mm up to 100mm to increase their performances, granting at the same time the absolute compatibility with the WS2811 protocol. That way, the lamps are made more flexible, efficient and unique. The same functions are integrated as default in the Smart operative mode.

In particular:

• It enables to manage and customize the duration of the Super Strobe, thus allowing to vary its intensity and frequency.
• Thermal protection: thanks to an internal temperature sensor, it is possible to limit the functioning of the lamp in case the temperature exceeds a certain limit, thus protecting the lamp when it is used in daylight in environments with extreme temperatures.
• Emergency mode. A common limit to all Pixel lamps is that, in case of absence of a correct control signal, the lamps are turned off. The Enhanced option overcomes this limit by turning on the lamps of a programmable colour and intensity if there is no correct control signal at power-up. With Enhanced the attraction will never be turned off!!

 As anticipated, the Pixel Enhanced lamps can be controlled with a standard controller compatible with the WS2811 protocol, but its default parameters can be reprogrammed only with a Fun-Led controller.

The lid is made of transparent methacrylate which prevents it from yellowing in case of UV exposure and assures an excellent resistance to bad weather conditions. Outside it is perfectly smooth in order to avoid the deposit of dust and dirt and to grant an easy cleaning. The lid is pressure mounted to the base for a quick installation. The standard inner pattern is the “Flower”, then there are following options upon request: “Sphere”, “Frozen” and “Transparent”. These characteristics refer also to the smallest model, though this one is integrated into its base.

D24 and R24 are our new socket models. They consist of a body which can be with two or four isolation drilling contacts and a socket cap which drills the isolation of the wires through the tightening of two screws, thus making the electrical connection. A common characteristic to both socket models is the compact volume and the safety in making a good electrical connection. The body presents a polarization which helps in setting the correct orientation of the lamp on the support.